April 24, 2021 More glue... More weights.
Adding the Second Soundboard (First Table)
Back To The Present For A Moment
OK, as you should know by now, all of the posts I have made up to this point have been historical posts of the building of the table that happened between the fall of 2019 and the fall of 2021. Most of the pictures have already been posted in Facebook, but I wanted to build... Continue Reading →
Adding The First of the Three Soundboard Panels
April 17, 2021 Did you notice the time gap since the last post. This was because the temperature was below what I THOUGHT was the minimum temperature range for the glue. April it was finally warm enough. Anyway, I spread the glue on with a big trowel. That's something I never want to do again.... Continue Reading →
Bolting The Two Tables Together
January 16, 2021 Mating the two tables. I had to get the small table at just the right height. I had to level it too. Not an easy thing to do on an uneven basement floor. https://youtu.be/e4hjqEjAD94 This is from underneath the big table. It starts out looking towards the end corner of the big... Continue Reading →
The Top on the Second Table is Done
January 10, 2021 The third plywood sheet (second table) is done. Now, once I get the big table in its final exact resting spot, I get to start leveling up and mating the second table to the first.
The Plywood Top on the Main Table
January 6, 2021 / January 9, 2021 As I mentioned (or should have) mentioned before, these are all pictures that I previously posted in Facebook. I did create a photo album but it's still hard to find old posts if you want to go back and review each one. That's why I created this blog.... Continue Reading →
One Final Look At The Table Without The Top
December 26, 2020 https://youtu.be/3i2a7y9Hax4 The last time I'll ever be able to look "through" the table. Next stop...the top.
How I Connected The Two Tables Electrically
December 25, 2020 I wired all the terminal blocks so that the basic DC power would be within easy reach from any point on the table. I wired a third terminal on the blocks with the ground wire simply because I didn't know if I'd ever need it or not. So I'm thinking "two wires... Continue Reading →
An Overview Of The Finished Wiring On The Main Table
November 25, 2020 https://youtu.be/h7ISQyYj5aE It's been 8 months since the last picture taken on the table. 2020 was a year to remember and not for the reasons you might think. We had some family issues that took about 6 months out of the year to take care of. Here is an overview of the main... Continue Reading →
Foundational Wiring – Continued
March 28, 2020 Here's a closer look at how I positioned the terminal block for mounting. I guess there's a little OCD in me after all but I wanted the terminal block in the same position on all the cross members, which was basically in the center horizontally and vertically. The two pieces of wood... Continue Reading →
My HO Slot Car Hobby 